Making cosmetics at home goes far beyond mixing natural-sounding ingredients. Among the most overlooked variables is pH, a value that affects ingredient stability, skin tolerance, and how well some preservatives work. This guide explains in simple terms how to measure it, when to adjust it, and what the limits of this check are.
What pH is and why it matters in skincare
pH indicates how acidic or alkaline a water-based solution is. The surface of the skin is naturally slightly acidic, a condition that supports the proper functioning of the skin barrier and the balance of its microbiota. A product with a pH far from that environment can be irritating or change how it feels on the skin.
That said, it’s worth avoiding a common myth: not every cream and serum must necessarily be adjusted to pH 5–5.5. The right range depends on the type of product, the active ingredients, the preservative system, and the formula’s specifications.
Which products need pH measurement
All products that contain water should be evaluated:
- Toners and lotions.
- Creams and emulsions.
- Cleansers.
- Water-based serums.
Completely anhydrous balms and oils have no directly measurable pH. This doesn’t mean they are free from other formulation risks, such as oxidation or contamination during preparation.
pH strips or digital meter: which one to use
pH strips
They are inexpensive and easy to use, and they give an estimate of the value. They work best if you choose narrow-range strips; very wide-range ones give readings that are of little use for formulating.
Digital meter (potentiometer)
A calibrated meter, with an electrode suited to the type of sample, allows more precise and reproducible measurements. It is especially recommended if you formulate often or work with emulsions, for which an appropriate electrode is needed.
How to check pH, step by step
- Take a representative sample in a clean, suitable container.
- Decide whether it can be measured directly or whether it needs a validated dilution procedure.
- Calibrate the meter with appropriate buffer solutions and measure at a controlled temperature.
- Compare the result with the range expected for your formula and its preservative system.
- Adjust gradually, if needed, with a compatible regulator, mixing and measuring again.
- Record the value and check whether it stays stable while you evaluate the product.
Some sources suggest diluting 10% of the product in 90% distilled water for certain samples. That ratio is not a universal method: dilution can change the measured value, so it’s best to follow a procedure suited to each type of formulation.
How to lower the pH of a formulation
To lower the pH, diluted solutions of citric acid or lactic acid are commonly used. Some basic guidelines:
- Prepare a solution of known concentration (for example, citric acid at 10% by mass) and don’t add the acid powder directly.
- Add only a very small amount each time, mix well, and measure again.
- Handle lactic acid concentrates with suitable protection.
- Check that the regulator is compatible with the rest of the ingredients.
These concentrations are examples of how to prepare the regulator, not amounts that should automatically be added to any product.
How to raise the pH
One commonly mentioned option is sodium bicarbonate in diluted solution. However, it is not always the most suitable regulator: it can affect the stability of certain formulas, and the choice depends on the specific cosmetic system. Always add in small amounts and measure after each adjustment.
Why pH also affects preservation
Some preservatives only work well within certain pH ranges. Adjusting the formula helps maintain the conditions they are designed to work in, but it does not replace preservative efficacy testing or microbiological control. Always check the preservative manufacturer’s specifications.
Common mistakes when measuring pH
- Using strips with too wide a range.
- Working with an uncalibrated meter.
- Measuring emulsions with unsuitable electrodes.
- Treating a single measurement as a guarantee of stability.
- Making abrupt adjustments without measuring again.
A correct pH isn’t everything
It’s worth distinguishing three concepts that are often confused: suitable pH, cosmetic stability, and microbiological safety. A product can have a skin-compatible pH and still become contaminated, separate, or contain irritating ingredients.
Personal use versus selling
Making cosmetics experimentally for your own use is not the same as manufacturing products to sell. Selling them requires additional controls and compliance with current regulations.
Conclusion
Measuring pH is an essential part of responsible formulation, but only one piece of the puzzle. Use suitable instruments, adjust patiently, record your results, and don’t forget preservation and hygiene. That way, your homemade creations will be safer and more reliable.